PRO VENTILATION HOOD LIGHT BULBS AND HEAT LAMPS

Topics:

  • Will the heat lamps work on the 20" riser with shelf?
  • Will the heat lamps work on the backsplash with shelves?
  • Will the heat lamps keep plates warm?
  • Part #805344
  • Heat lamps for 27" deep pro wall hoods

Answer:

The Pro Hood Heat Lamps will produce heat that reaches the Wolf backsplash accessory shelves and the Wolf 20" riser shelf.

  • 27" deep wall hoods are equipped with two heat lamp receptacles that require R40 or BR40, 250W maximum bulbs (white, clear and red bulbs are acceptable for use).
  • Heat lamps are not included with the hood but are available at any hardware store.
  • Wolf offers white heat lamp bulbs for purchase from a Parts Distributor, part #805344.
  • Standard bulbs are incandescent, but halogen bulbs can be used.
  • Bulb socket is standard, so bulbs other than heat lamps can fit.
  • Wolf recommends using the white heat lamp to take full advantage of the Heat Lamp feature.
  • There is no insert or cover available to fill the heat lamp receptacle if no heat lamp is installed.
  • A 'spot type' bulb would work and have similar temperature ratings.
  • It is important to match the diameter of the bulb so the recess area around the bulb is not exposed to excess heat. A bulb of smaller diameter should not be used.
  • This bulb type will not produce the infrared effect required to deliver the heating effect of our specified bulb.
  • Using the hood without bulbs in place will not harm the hood.
  • Heat lamps work best for food placed 12-18" below the bottom of hood.

CORE ISSUE:

  • Size, wattage, and color of bulbs in Pro Series Ventilation Hoods
  • Number of light bulbs are in a Pro Ventilation Hood
  • When did the light bulb style change in Pro Hoods; do the light bulbs contain halogen?
  • Ventilation hood light bulbs do not work, burnt out, burn out soon after replacement, or replacement bulbs do not work
  • Pro Ventilation Hood replacement light bulb part numbers

STEPS TO VERIFY ISSUE:

If Pro Ventilation Hood lights do not work:

  1. Verify that power is supplied to the hood.
  2. Replace the bulbs.
    • Light bulbs are available for purchase at local hardware stores or through an authorized Factory Certified Parts Distributor. See below for a complete list of bulb types.
    • Heat lamps must be purchased separately.
    • Light bulbs are not available for purchase from the Sub-Zero, Wolf, and Cove website.
    • Wear gloves for safety when replacing light bulbs.

Tips:

  • Standard bulbs for task lighting are shipped with the unit.
  • Touching halogen bulbs with bare hands can cause them to burn out quickly.
  • Bulbs with lower wattage may be used but will not be as bright.
  • Using a bulb with a larger wattage than listed is not suggested since the hood is not rated for higher wattage.
  • Standard bulbs are incandescent or halogen.
  • Wolf does not recommend replacing lights with LED bulbs.

If these steps do not resolve the issue, no further troubleshooting advice is available. Contact Factory Certified Service to schedule an appointment for repair.

ANSWER:

To determine which Pro Hood model you have, see the model number on the serial tag. Wolf Serial Tag Location Guide provides serial tag or product rating plate location for current production models.

PRO HOOD MODEL NUMBER OF LIGHT BULBS BULB PART # FOR PARTS DISTRIBUTOR PURCHASE BULB DESCRIPTION FOR LOCAL OR WEB PURCHASE

22" DEEP HOODS

W302210 2 811189*
BASE: E26 medium
VOLTAGE: 120V
WATT: 50W
TYPE: 39 PAR 20
STYLE: Flood light, screw-in, non-dimmable, halogen bulb
DIMENSIONS: 2-1/2" diameter x 3-1/4" length
W362210 2
W422210 2
W482210 3
PW302210 2

Starting with serial number 11397161, part # 815585

BASE: GU10
VOLTAGE: 120V
WATT: 50W
TYPE: MR16
STYLE: Flood light, push-and-twist non-dimmable halogen bulb
DIMENSIONS: 2" diameter x 2-1/16" length
Prior to serial number 11397161, part # 811189*
BASE: E26 medium
VOLTAGE: 120V
WATT: 50W
TYPE: 39 PAR 20
STYLE: Flood light, screw-in, non-dimmable, halogen bulb
DIMENSIONS: 2-1/2" diameter x 3-1/4" length
PW362210 2

Starting with serial number 11397161, part # 815585

BASE: GU10
VOLTAGE: 120V
WATT: 50W
TYPE: MR16
STYLE: Flood light, push-and-twist non-dimmable halogen bulb
DIMENSIONS: 2" diameter x 2-1/16" length
Prior to serial number 11397161, part # 811189*
BASE: E26 medium
VOLTAGE: 120V
WATT: 50W
TYPE: 39 PAR 20
STYLE: Flood light, screw-in, non-dimmable, halogen bulb
DIMENSIONS: 2-1/2" diameter x 3-1/4" length
PW422210 2

Starting with serial number 11397161, part # 815585

BASE: GU10
VOLTAGE: 120V
WATT: 50W
TYPE: MR16
STYLE: Flood light, push-and-twist non-dimmable halogen bulb
DIMENSIONS: 2" diameter x 2-1/16" length
Prior to serial number 11397161, part # 811189*
BASE: E26 medium
VOLTAGE: 120V
WATT: 50W
TYPE: 39 PAR 20
STYLE: Flood light, screw-in, non-dimmable, halogen bulb
DIMENSIONS: 2-1/2" diameter x 3-1/4" length
PW482210 3

Starting with serial number 11397161, part # 815585

BASE: GU10
VOLTAGE: 120V
WATT: 50W
TYPE: MR16
STYLE: Flood light, push-and-twist non-dimmable halogen bulb
DIMENSIONS: 2" diameter x 2-1/16" length
Prior to serial number 11397161, part # 811189*
BASE: E26 medium
VOLTAGE: 120V
WATT: 50W
TYPE: 39 PAR 20
STYLE: Flood light, screw-in, non-dimmable, halogen bulb
DIMENSIONS: 2-1/2" diameter x 3-1/4" length

24" DEEP HOODS

W302418 2 811189*
BASE: E26 medium
VOLTAGE: 120V
WATT: 50W
TYPE: 39 PAR 20
STYLE: Flood light, screw-in, non-dimmable, halogen bulb
DIMENSIONS: 2-1/2" diameter x 3-1/4" length
W362418 2
W422418 2
W482418 3
W542418 3
W602418 3
W662418 3
PW302418 2

Starting with serial number 11397161, part # 815585

BASE: GU10
VOLTAGE: 120V
WATT: 50W
TYPE: MR16
STYLE: Flood light, push-and-twist non-dimmable halogen bulb
DIMENSIONS: 2" diameter x 2-1/16" length
Prior to serial number 11397161, part # 811189*
BASE: E26 medium
VOLTAGE: 120V
WATT: 50W
TYPE: 39 PAR 20
STYLE: Flood light, screw-in, non-dimmable, halogen bulb
DIMENSIONS: 2-1/2" diameter x 3-1/4" length
PW362418 2

Starting with serial number 11397161, part # 815585

BASE: GU10
VOLTAGE: 120V
WATT: 50W
TYPE: MR16
STYLE: Flood light, push-and-twist non-dimmable halogen bulb
DIMENSIONS: 2" diameter x 2-1/16" length
Prior to serial number 11397161, part # 811189*
BASE: E26 medium
VOLTAGE: 120V
WATT: 50W
TYPE: 39 PAR 20
STYLE: Flood light, screw-in, non-dimmable, halogen bulb
DIMENSIONS: 2-1/2" diameter x 3-1/4" length
PW422418 2

Starting with serial number 11397161, part # 815585

BASE: GU10
VOLTAGE: 120V
WATT: 50W
TYPE: MR16
STYLE: Flood light, push-and-twist non-dimmable halogen bulb
DIMENSIONS: 2" diameter x 2-1/16" length
Prior to serial number 11397161, part # 811189*
BASE: E26 medium
VOLTAGE: 120V
WATT: 50W
TYPE: 39 PAR 20
STYLE: Flood light, screw-in, non-dimmable, halogen bulb
DIMENSIONS: 2-1/2" diameter x 3-1/4" length
PW482418 3

Starting with serial number 11397161, part # 815585

BASE: GU10
VOLTAGE: 120V
WATT: 50W
TYPE: MR16
STYLE: Flood light, push-and-twist non-dimmable halogen bulb
DIMENSIONS: 2" diameter x 2-1/16" length
Prior to serial number 11397161, part # 811189*
BASE: E26 medium
VOLTAGE: 120V
WATT: 50W
TYPE: 39 PAR 20
STYLE: Flood light, screw-in, non-dimmable, halogen bulb
DIMENSIONS: 2-1/2" diameter x 3-1/4" length
PW542418 3

Starting with serial number 11397161, part # 815585

BASE: GU10
VOLTAGE: 120V
WATT: 50W
TYPE: MR16
STYLE: Flood light, push-and-twist non-dimmable halogen bulb
DIMENSIONS: 2" diameter x 2-1/16" length
Prior to serial number 11397161, part # 811189*
BASE: E26 medium
VOLTAGE: 120V
WATT: 50W
TYPE: 39 PAR 20
STYLE: Flood light, screw-in, non-dimmable, halogen bulb
DIMENSIONS: 2-1/2" diameter x 3-1/4" length
PW602418 3

Starting with serial number 11397161, part # 815585

BASE: GU10
VOLTAGE: 120V
WATT: 50W
TYPE: MR16
STYLE: Flood light, push-and-twist non-dimmable halogen bulb
DIMENSIONS: 2" diameter x 2-1/16" length
Prior to serial number 11397161, part # 811189*
BASE: E26 medium
VOLTAGE: 120V
WATT: 50W
TYPE: 39 PAR 20
STYLE: Flood light, screw-in, non-dimmable, halogen bulb
DIMENSIONS: 2-1/2" diameter x 3-1/4" length
PW662418 3

Starting with serial number 11397161, part # 815585

BASE: GU10
VOLTAGE: 120V
WATT: 50W
TYPE: MR16
STYLE: Flood light, push-and-twist non-dimmable halogen bulb
DIMENSIONS: 2" diameter x 2-1/16" length
Prior to serial number 11397161, part # 811189*
BASE: E26 medium
VOLTAGE: 120V
WATT: 50W
TYPE: 39 PAR 20
STYLE: Flood light, screw-in, non-dimmable, halogen bulb
DIMENSIONS: 2-1/2" diameter x 3-1/4" length

27" DEEP HOODS**

W302718 2 811189*
BASE: E26 medium
VOLTAGE: 120V
WATT: 50W
TYPE: 39 PAR 20
STYLE: Flood light, screw-in, non-dimmable, halogen bulb
DIMENSIONS: 2-1/2" diameter x 3-1/4" length
W362718 2
W422718 2
W482718 3
W542718 3
W602718 3
W662718 3
PW302718 2

Starting with serial number 11397161, part # 815585

BASE: GU10
VOLTAGE: 120V
WATT: 50W
TYPE: MR16
STYLE: Flood light, push-and-twist non-dimmable halogen bulb
DIMENSIONS: 2" diameter x 2-1/16" length
Prior to serial number 11397161, part # 811189*
BASE: E26 medium
VOLTAGE: 120V
WATT: 50W
TYPE: 39 PAR 20
STYLE: Flood light, screw-in, non-dimmable, halogen bulb
DIMENSIONS: 2-1/2" diameter x 3-1/4" length
PW362718 2

Starting with serial number 11397161, part # 815585

BASE: GU10
VOLTAGE: 120V
WATT: 50W
TYPE: MR16
STYLE: Flood light, push-and-twist non-dimmable halogen bulb
DIMENSIONS: 2" diameter x 2-1/16" length
Prior to serial number 11397161, part # 811189*
BASE: E26 medium
VOLTAGE: 120V
WATT: 50W
TYPE: 39 PAR 20
STYLE: Flood light, screw-in, non-dimmable, halogen bulb
DIMENSIONS: 2-1/2" diameter x 3-1/4" length
PW422718 2

Starting with serial number 11397161, part # 815585

BASE: GU10
VOLTAGE: 120V
WATT: 50W
TYPE: MR16
STYLE: Flood light, push-and-twist non-dimmable halogen bulb
DIMENSIONS: 2" diameter x 2-1/16" length
Prior to serial number 11397161, part # 811189*
BASE: E26 medium
VOLTAGE: 120V
WATT: 50W
TYPE: 39 PAR 20
STYLE: Flood light, screw-in, non-dimmable, halogen bulb
DIMENSIONS: 2-1/2" diameter x 3-1/4" length
PW482718 3

Starting with serial number 11397161, part # 815585

BASE: GU10
VOLTAGE: 120V
WATT: 50W
TYPE: MR16
STYLE: Flood light, push-and-twist non-dimmable halogen bulb
DIMENSIONS: 2" diameter x 2-1/16" length
Prior to serial number 11397161, part # 811189*
BASE: E26 medium
VOLTAGE: 120V
WATT: 50W
TYPE: 39 PAR 20
STYLE: Flood light, screw-in, non-dimmable, halogen bulb
DIMENSIONS: 2-1/2" diameter x 3-1/4" length
PW542718 3

Starting with serial number 11397161, part # 815585

BASE: GU10
VOLTAGE: 120V
WATT: 50W
TYPE: MR16
STYLE: Flood light, push-and-twist non-dimmable halogen bulb
DIMENSIONS: 2" diameter x 2-1/16" length
Prior to serial number 11397161, part # 811189*
BASE: E26 medium
VOLTAGE: 120V
WATT: 50W
TYPE: 39 PAR 20
STYLE: Flood light, screw-in, non-dimmable, halogen bulb
DIMENSIONS: 2-1/2" diameter x 3-1/4" length
PW602718 3

Starting with serial number 11397161, part # 815585

BASE: GU10
VOLTAGE: 120V
WATT: 50W
TYPE: MR16
STYLE: Flood light, push-and-twist non-dimmable halogen bulb
DIMENSIONS: 2" diameter x 2-1/16" length
Prior to serial number 11397161, part # 811189*
BASE: E26 medium
VOLTAGE: 120V
WATT: 50W
TYPE: 39 PAR 20
STYLE: Flood light, screw-in, non-dimmable, halogen bulb
DIMENSIONS: 2-1/2" diameter x 3-1/4" length
PW662718 3

Starting with serial number 11397161, part # 815585

BASE: GU10
VOLTAGE: 120V
WATT: 50W
TYPE: MR16
STYLE: Flood light, push-and-twist non-dimmable halogen bulb
DIMENSIONS: 2" diameter x 2-1/16" length
Prior to serial number 11397161, part # 811189*
BASE: E26 medium
VOLTAGE: 120V
WATT: 50W
TYPE: 39 PAR 20
STYLE: Flood light, screw-in, non-dimmable, halogen bulb
DIMENSIONS: 2-1/2" diameter x 3-1/4" length

HOOD LINERS

L282212 2 811189*
BASE: E26 medium
VOLTAGE: 120V
WATT: 50W
TYPE: 39 PAR 20
STYLE: Flood light, screw-in, non-dimmable, halogen bulb
DIMENSIONS: 2-1/2" diameter x 3-1/4" length
L342212 2
L402212 2
L462212 2
L522212 3
L582212 3
PL342212 2

815585

Service parts for the 19" and 22" Pro Hood Liners are the same.

BASE: GU10
VOLTAGE: 120V
WATT: 50W
TYPE: MR16
STYLE: Flood light, push-and-twist non-dimmable halogen bulb
DIMENSIONS: 2" diameter x 2-1/16" length
PL402212 2

PL462212

PL461912

2
PL522212 3
PL582212 3

WALL CHIMNEY HOODS

PWC362418 2

Starting with serial number 14805508, part # 815585

BASE: GU10
VOLTAGE: 120V
WATT: 50W
TYPE: MR16
STYLE: Flood light, push-and-twist non-dimmable halogen bulb
DIMENSIONS: 2" diameter x 2-1/16" length
Prior to serial number 14805508, part # 811189*
BASE: E26 medium
VOLTAGE: 120V
WATT: 50W
TYPE: 39 PAR 20
STYLE: Flood light, screw-in, non-dimmable, halogen bulb
DIMENSIONS: 2-1/2" diameter x 3-1/4" length
PWC422418 2

Starting with serial number 14805508, part # 815585

BASE: GU10
VOLTAGE: 120V
WATT: 50W
TYPE: MR16
STYLE: Flood light, push-and-twist non-dimmable halogen bulb
DIMENSIONS: 2" diameter x 2-1/16" length
Prior to serial number 14805508, part # 811189*
BASE: E26 medium
VOLTAGE: 120V
WATT: 50W
TYPE: 39 PAR 20
STYLE: Flood light, screw-in, non-dimmable, halogen bulb
DIMENSIONS: 2-1/2" diameter x 3-1/4" length
PWC482418 3

Starting with serial number 14805508, part # 815585

BASE: GU10
VOLTAGE: 120V
WATT: 50W
TYPE: MR16
STYLE: Flood light, push-and-twist non-dimmable halogen bulb
DIMENSIONS: 2" diameter x 2-1/16" length
Prior to serial number 14805508, part # 811189*
BASE: E26 medium
VOLTAGE: 120V
WATT: 50W
TYPE: 39 PAR 20
STYLE: Flood light, screw-in, non-dimmable, halogen bulb
DIMENSIONS: 2-1/2" diameter x 3-1/4" length
PWC542418 3

Starting with serial number 14805508, part # 815585

BASE: GU10
VOLTAGE: 120V
WATT: 50W
TYPE: MR16
STYLE: Flood light, push-and-twist non-dimmable halogen bulb
DIMENSIONS: 2" diameter x 2-1/16" length
Prior to serial number 14805508, part # 811189*
BASE: E26 medium
VOLTAGE: 120V
WATT: 50W
TYPE: 39 PAR 20
STYLE: Flood light, screw-in, non-dimmable, halogen bulb
DIMENSIONS: 2-1/2" diameter x 3-1/4" length

ISLAND HOODS

I363418 2 811189*
BASE: E26 medium
VOLTAGE: 120V
WATT: 50W
TYPE: 39 PAR 20
STYLE: Flood light, screw-in, non-dimmable, halogen bulb
DIMENSIONS: 2-1/2" diameter x 3-1/4" length
I423418 2
I543418 3
I663418 3
PI363418 2 815585
BASE: GU10
VOLTAGE: 120V
WATT: 50W
TYPE: MR16
STYLE: Flood light, push-and-twist non-dimmable halogen bulb
DIMENSIONS: 2" diameter x 2-1/16" length
PI423418 2
PI543418 3
PI663418 3

* Bulb is incandescent. If LED bulbs are used, they may only work on the high light setting. For this reason, Wolf does not suggest use of CFL or LED lights on models that did not come with them.

**All 27" deep hoods also have receptacles for two heat lamp bulbs. Refer to Pro Hood Heat Lamps for more information.

 

We at Appliance Parts Canada of course often source spares far cheaper than anywhere else and some of the prices that we see online are just ridiculous. If you want to save some money then please give us a try. Please email us for spare availability.

 

Buy spare parts in our store at Appliance Parts Canada from our team of spares experts that have a vast knowledge of the domestic appliance industry and will help you find any part you need and get it to you as fast and cheap as possible. Please email us for spare availability.  

 

WANT TO GET IN TOUCH? You are welcome to contact us by email sales@appliancepartscanada with inquires or through our contact form. We are always here to help!

LOOKING FOR SUPPORT? If you're having any troubles or don't know what to do while purchasing appliance parts or accessories through our store, then call us toll-free: 1-800-451-9832

Leave a comment

Name .
.
Message .

Please note, comments must be approved before they are published

x