Programming Instructions for WPW10310240

After installing the new control board part number WPW10310240 the display will flash PE0000.  This means the refrigerator is in programming mode and you will need to enter the program code from the model and serial number tag on the refrigerator.  Please follow the instructions below to program the new control board.  We have come across two different programming versions for this control board depending on the model refrigerator.  Please make sure to look at both versions to see which one applies to your refrigerator.  Also, on some model refrigerators the door(s) may need to be opened to program.

Programming Mode (Version 1):

NOTE: The Program Code is located on the Serial Plate on this unit after the word Code.

1. Press and hold the Door Alarm Keypad DoorAlarm.
2. Press and hold Freezer Temperature Down Keypad.
3. Release the Door Alarm Keypad DoorAlarm and wait 3 seconds.
4. The control will display PE to indicate the programming mode.
5. Entry is confirmed by pressing the Freezer Temperature Down Keypad once more.
6. The control will display the current Program CODE. This value should be validated with the Program CODE printed on the unit serial plate.

NOTE: If the Program CODE is correct, the Programming Mode is exited by pressing Door Alarm Keypad for 3 seconds.

7. Press the Refrigerator Temperature Up Keypad or Refrigerator Down Keypad to change the digit value with each key press.
8. The decimal point indicates the selected digit. Press the Freezer Temperature Up Keypad to select the next digit.
9. Once the desired Program CODE is entered, press and hold the Freezer Temperature Down Keypad until the Program CODE begins flashing indicating it has been saved.

NOTE: If you attempt to enter an invalid Program CODE the control will not save the new code, but will beep. (The unit will NOT run with a Program CODE of 0000). Once the Program CODE has been saved the Programming Mode is exited by pressing any key. If the new code is incorrect this process should be repeated. The Programming mode can be exited at any time by pressing Door Alarm key for 3 seconds or will exit if unattended for four minutes.

Programming Mode (Version 2):
NOTE: The Program Code is located on the Serial Plate on this unit after the word Code.
1. Press and hold the WATER Keypad.
2. Press and hold LL Keypad.
3. Release the WATER Keypad and wait 3 seconds.
4. The control will display PE to indicate the programming mode.
5. Entry is confirmed by pressing the LL Keypad once more.
6. The control will display the current Program CODE. This value should be validated with the Program
CODE printed on the unit serial plate.

NOTE: If the Program CODE is correct, the Programming Mode is exited by pressing water
Keypad for 3 seconds.

7. Press the UR Keypad or LR Keypad to change the digit value with each key press.
8. The decimal point indicates the selected digit. Press the UL Keypad to select the next digit.
9. Once the desired Program CODE is entered, press and hold the LL Keypad until the Program CODE
begins flashing indicating it has been saved.

NOTE: If you attempt to enter an invalid Program CODE the control will not save the new code, but will
beep. (The unit will NOT run with a Program CODE of 0000).Once the Program CODE has been saved
the Programming Mode is exited by pressing any key or by opening or closing the refrigerator door. If
the new code is incorrect this process should be repeated.
The Programming mode can be exited at any time by pressing WATER key for 3 seconds or will exit if
unattended for four minutes.

 

This is a repair service for a Whirlpool main refrigerator control board, OEM part number WPW10310240. This part also fits, Amana, Maytag, Kenmore, KitchenAid, Jenn-Air, and Dacor refrigerators. This control board can fail in the following ways:

  • Display lights flashing
  • Ice dispenser door flapping between open/close position
  • Constant clicking or beeping
  • Refrigerator is not cooling properly due to dispenser flapping 

The clear benefit of our repair service compared to purchasing a new replacement control board is that we correct the root cause of the problem.  We replace the faulty control board components with high quality upgraded components, which ensures your control board's longevity and proper function.

The part number, WPW10310240, replaced the following part numbers:

  • W10310240
  • 12920717SP
  • 12920719SP
  • W10213583
  • 12920724
  • 12920721
  • W10191108
  • W10165854
  • W10164422
  • W10164420
  • W10162662
  • WPW10312695
  • W10312695

 

We at Appliance Parts Canada of course often source spares far cheaper than anywhere else and some of the prices that we see online are just ridiculous. If you want to save some money then please give us a try. Please email us for spare availability.

 

Buy spare parts in our store at Appliance Parts Canada from our team of spares experts that have a vast knowledge of the domestic appliance industry and will help you find any part you need and get it to you as fast and cheap as possible. Please email us for spare availability.  

 

WANT TO GET IN TOUCH? You are welcome to contact us by email sales@appliancepartscanada with inquires or through our contact form. We are always here to help!

LOOKING FOR SUPPORT? If you're having any troubles or don't know what to do while purchasing appliance parts or accessories through our store, then call us toll-free: 1-800-451-9832

Leave a comment

Name .
.
Message .

Please note, comments must be approved before they are published

x